Lab Essentials
AMPIVIEW® RNA probes
Enabling Your Projects 
GMP Services
Bulk Solutions
Research Travel Grant
Have You Published Using an Enzo Product?
Cellular Analysis
No decrease of the fluorescent signal after using a specific inhibitor
Inhibitor concentration is too low or too high. Very low doses of inhibitor may not affect ROS production by inducer.…
Tue, Jul 18, 2023
Insulin does not go into solution.
Insulin was not reconstituted in deionized water prior to dilution. Resuspend Insulin in deionized water before dilution into PBE Buffer.
Tue, Jul 18, 2023
Inconsistent results between PDI assay experiments.
This is caused by inappropriate Stop Reagent addition. Be sure to pre-incubate with Stop Reagent to terminate both the enzyme…
Tue, Jul 18, 2023
More than one aggregation peak is observed.
A protein might have multiple domains that start aggregation at different temperatures. For most samples, any aggregation is an indication…
Tue, Jul 18, 2023
High fluorescent signal at start of run
Protein formed aggregates before the run started. Use a different buffer or additive. Gain setting is too high. Many thermocyclers…
Tue, Jul 18, 2023
Poor signal observed in the assay
Staining reagent has been exposed to strong light. Protect reagents from exposure to strong light.
Tue, Jul 18, 2023
High fluorescence signal observed in negative control
Sample contains interfering substances. The assay is compatible with commonly used buffers (PBS, Tris, HEPES) and excipients (trehalose and sucrose),…
Tue, Jul 18, 2023
What is the purpose of treating samples with 5% metaphosphoric acid (MPA)?
MPA should be added to fresh samples prior to sample handling or sample storage. That is required to deproteinize samples…
Tue, Jul 18, 2023
Values for this assay are reported as pmol/well. How can I convert the values obtained by this kit into a value that is more commonly reported in the literature, such as pmol/L (pM)?
Since the volume of sample added to each well is 50µL, results can be converted to molarity by multiplying by…
Tue, Jul 18, 2023
Protein signal is saturated.
The concentration from protein sample is too high. Dilute the sample further with 1X Assay Buffer.
Tue, Jul 18, 2023